|
|
 |
 |
CERTIGRADE®
Overview
Rebutted/Rejointed Shingles are manufactured specifically for exterior and interior wall surface uses. They are a low maintenance product that adds beauty, texture, durability and insulating qualities to either new construction or remodeling and renovation of existing structures.
Rebutted/Rejointed Shingles
Appearance
Manufactured from Number 1 Grade Blue Label or Number 2 Grade Red label Certigrade® red cedar shingles, trimmed for parallel edges with butts sawn at right angles. Available in both sawn and sanded face textures.
Finishes
Natural, primed white, primed gray, or special order colors.
Lengths
16-inch, 18-inch and 24-inch.
Number 1 Grade, Blue Label
Description
Lengths 16-inch, 18-inch, 24-inch; width 4" minimum; thickness of 16-inch is 5/2" (5 butts together measure 2" thick), 18-inch is 5/2-¼" thick, 24-inch is 4/2" thick. Clear heartwood: 100% edge grain; no defects.
Recommended Use
For exterior and interior walls where a premium quality product is desired.
Number 2 Grade, Red Label
Description
Lengths 16-inch, 18-inch, 24-inch; width 4" minimum; thickness of 16-inch is 5/2" (5 butts together measures 11" and 16" clear or better on 16-inch, 18-inch and 24-inch shingles, respectively. Limited sapwood and flat grain are allowed. Limited knots and defects are allowed above the clear portion.
Recommended Use
For exterior and interior walls where a good quality product is desired.
Wall Exposure Table
No. 1 Grade, Blue Label®
|
16" |
7" |
12" |
18" |
8" |
14" |
24" |
10½" |
16" |
|
Maximum weather exposure for No.2 Grade, Red Label Rebutted and Rejointed shingles should be in accordance with the manufacturer's recommendations.
These red cedar shakes and shingles are manufactured in accordance with standards established by the Cedar Shake & Shingle Bureau.
This is only a product description sheet necessary for selection of materials and grades. For a new roof construction manual and/or wall manual please contact: info@cedarbureau.com.
|
|
 |
 |
|
